When stamping electronic components, attention should be paid to the following aspects: material selection, mold design, processing technology, surface treatment, and quality inspection
It's easy to look at a part, but it's actually not. You may not know how complex it is to process a part, different cutting tools, different cutting methods, different parameter settings, and so on.
Safety Operating Regulations for Small Parts Processing: 1. Before working, lubricate the machine tool according to regulations, check if all handles are in place, and run the machine slowly for five minutes to confirm that everything is normal before operation. 2. The chuck chuck should be securely fastened, and the wrench should not be left on the chuck or chuck when starting the machine. 3. The workpiece and tool clamping should be firm, and the tool bar should not extend too long (except for boring holes); When rotating the small tool holder, stop it to prevent the tool from colliding with the chuck, workpiece, or scratching the hand.
Maintenance of convex and concave molds for metal stamping:
In manufacturers of metal stamping parts, molds and presses are generally used to process metal sheet materials or strips at room temperature. Stamping molds and presses are used to process metal sheet materials or strips at room temperature to obtain parts with a certain shape and size required by various industries. These parts are called stamping parts, The qualification rate of stamping parts is directly related to the economic benefits of hardware stamping parts manufacturers.
Nowadays, with the continuous improvement of living standards, various processing technologies are constantly emerging, and metal stamping parts have been widely used in many fields, which shows that metal stamping parts have been closely related to our lives. I believe many people also know that metal stamping parts are made through stamping process, and stamping process is inseparable from mold processing.
